A sump pump that stays silent while water rises, runs without stopping, or cycles repeatedly needs attention. Those symptoms do not identify one certain fault: the problem could involve the pump, its controls, a power interruption, the discharge route, or more water arriving than the system can manage. Start with safety and a few observations you can make from a dry area. If water is entering your home, call for help promptly.
First, keep clear of electrical and flood hazards
Do not step into standing water to reach a pump, plug, switch, or electrical panel. Do not open equipment or try to restart anything that may have been exposed to water. Technical Safety BC's flood guidance says water-exposed gas and electrical equipment should be assessed by a licensed gas or electrical contractor before it is turned on. If officials have issued an evacuation instruction, follow it.
From a safe, dry location, note whether other parts of the home have power, whether a pump alarm is sounding, whether the water level appears to be rising, and whether you hear the pump start or cycle. These observations help a contractor assess urgency; they are not a diagnosis. If water is approaching electrical or gas equipment, tell the contractor immediately.
What the symptoms may mean
The pump does not start: A loss of power, control issue, or pump failure may be involved. Avoid handling a wet plug or receptacle. Record whether the rest of the home has power and whether an alarm has sounded.
The pump runs continuously: Water may be arriving quickly, or the pump may not be moving it away effectively. A contractor may need to inspect the pump, controls, and discharge route. Do not assume that running continuously means the pump is protecting the property.
The pump starts and stops repeatedly: Note how often this happens and whether the water level changes. Repeated cycling deserves an on-site check; the cause cannot be determined reliably from sound alone.
Water rises despite the pump running: Treat the rising water as urgent. Rainfall, blocked drainage, and pump or discharge problems can interact. Move people away from the affected area and arrange an assessment.
What to tell the person you call
Share when the problem started, which of the symptoms above you see, whether water is entering a living area, and whether electrical or gas equipment may be wet. Mention any alarm, power outage, recent service, or visible pump model if you can read it without approaching water or equipment. A clear description helps the technician bring the right equipment and decide how quickly to attend.
Hippo Plumbing & Heating lists sump pump installation, maintenance, and repair among its residential plumbing services in Coquitlam and nearby communities. If the issue may involve blocked drains or sewer lines, its drainage services describe the separate drain and sewer work it offers. Ask for an on-site assessment before choosing repair or replacement; the recommendation should follow the actual condition of the pump and drainage system.
Check the right drainage problem
A sump pump on private property and a blocked street catch basin are different issues. The City of Coquitlam's flood protection guidance explains how blocked foundation drains, sumps, gutters, and catch basins can contribute to flooding. Port Coquitlam's catch basin guidance addresses street drainage. If the concern is a municipal catch basin, report it to the city; if water is entering your home or your pump is malfunctioning, arrange a property-side assessment.
Before the next storm, review your household flood plan. PreparedBC's flood preparation guidance includes sump pumps among possible flood-preparation measures, alongside keeping gutters and nearby storm drains clear. No single measure guarantees that a home will stay dry.
If your sump pump is not working or water is rising, contact Hippo Plumbing & Heating or call (604) 365-0812. For immediate danger or evacuation instructions, follow local emergency authorities.